WHAT IS A BATHTUB LINER?

A new ¼" thick acrylic bathtub custom molded to fit right over your existing tub, without tearing up your existing plumbing or surrounding wall area. Our factory has over 500 different style tub molds, and once we determine your style through pictures and measurements, a new tub liner is made for your specific tub.

We have everything you need to bring your bathroom into the 21st century. If you are thinking of remodeling your bathroom, you were probably wondering what to do about that that ugly and outdated bathtub. Look no further. BC Tub Liners carries tub liners and wall surrounds that will make updating a snap. Let us take care of it and you will be soaking in your gorgeous new tub the very next morning.

Check out these "before and after" pictures of work we have recently completed and you be the judge. A new tub can be installed for you in 4 hours.

SAVE TIME & MONEY
ALL PRICES INCLUDE INSTALLATION

CALL FOR A
FREE ESTIMATE
[250] 479-3166
1-800-953-6573

Walk-In-Shower

THE BC TUB LINERS BATH AND
WALL MAINTENANCE AND CARE

DO NOT USE CLEANERS WITH ABRASIVES IN THEM AS THEY WILL DULL AND RUIN THE SURFACE. DO NOT USE ANY CORROSIVE
CHEMICALS SUCH AS BLEACH OR LAQUER THINNERS ON THE WALL AND THEY MAY STAIN THE SURFACE.

1. Your bath and/or wall has a high gloss finish which needs little care to keep it looking new for years to come. A wipe down with a clean cloth to remove excess water after use is required. If using a disinfectant, use a detergent without abrasives. Most clear liquid soaps are abrasive free.

2.In addition we recommend regular preventative maintenance which will go a long way to keep you walls easy to clean and looking shiny. We suggest that you apply an application of regular acrylic polish such as Gel-Gloss to the tub and/or wall at least every six months or when the wall begins to look dull and the water ceases to bead up on the surface. The polish will prevent soap and sludge build up and make it easier to wipe down after each use.

3. Be careful to maintain the silicone sealant that seals the tub to the wall surrounding it. If you suspect that it is cracked or that the seal is broken, replace or re-seal it immediately to prevent water damage below. If in doubt, call your BC Tub Liners dealer, who will re-seal it for a nominal house-call charge should your installation warranty be expired.

PROBLEMS
Should your tub become dull due to mineral and soap build up, use non-abrasive bathroom cleaner, then apply a marble or acrylic cleaner and polish. If this does not work call you local BC Tub Liner for advice. If you wall becomes damaged due to misuse or accidental mishaps it can in most cases be repaired and its original lustre restored.

SCRATCHES AND PHYSICAL DAMAGE
Small scratches can be polished out with rubbing compound. For more serious deeper scratches or damage, call you local BC Tub Liners to have a professional repairman give advice and repair. The great advantage of the BC Tub Liners system is that is has a homogeneous surface layer of colour which allows a professional to do almost perfect restorations.